All "**.exe" programs will not start by just clicking on the shortcut icon.
All "**.exe" programs will not start by just clicking on the shortcut icon. I need to right click and select "Run as Administrator" to get the program to run.
When left clicking, a box to opens that says"Windows cannot open this file: File iexplore.exe
(example)." It then goes on to ask if I want to use the web or select a program from a list of installed programs.
Is there a way to get this back to 'normal?'
Anwsers to the Problem All "**.exe" programs will not start by just clicking on the shortcut icon.
Hi,
If you need to check for malware here are my recommendations - these will allow you to do
a thorough check and removal without ending up with a load of spyware programs running
resident which can cause as many issues as the malware and maybe harder to detect as
the cause.
No one program can be relied upon to detect and remove all malware.
Added that often easy
to detect malware is often accompanied by a much harder to detect and remove payload.
So
its better to be overly thorough now than to pay the high price later.
Check with these to an
extreme overkill point and then run the cleanup only when you are very sure the system is clean.
These can be done in Safe Mode - repeatedly tap F8 as you boot however you should also run
them in regular Windows when you can.
TDSSKiller.exe.
- Download to the Desktop - then go to it and Right Click on it - RUN AS ADMIN
it will show any infections in the report after running - if it will not run change the name from
tdsskiller.exe to tdsskiller.com.
Whether it finds anything or not does not mean you should not
check with the other methods below.
http://support.kaspersky.com/viruses/solutions?qid=208280684
Download malwarebytes and scan with it, run MRT, and add Prevx to be sure it is gone.
(If Rootkits run UnHackMe)
Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN
Malwarebytes - free
http://www.malwarebytes.org/products/malwarebytes_free
SuperAntiSpyware Portable Scanner - Free
http://www.superantispyware.com/portablescanner.html?tag=SAS_HOMEPAGE
Run the Microsoft Malicious Removal Tool
Start - type in Search box -> MRT find at top of list - Right Click on it - RUN AS ADMIN.
You should be getting this tool and its updates via Windows Updates - if needed you can
download it here.
Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN
(Then run MRT as above.)
Microsoft Malicious Removal Tool - 32 bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious Removal Tool - 64 bit
http://www.microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure it is all gone.
Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN
Prevx - Home - Free - small, fast, exceptional CLOUD protection, works with other
security programs.
This is a scanner only, VERY EFFECTIVE, if it finds something come back
here or use Google to see how to remove.
http://www.prevx.com/ <-- information
http://info.prevx.com/downloadcsi.asp?prevx=Y <-- download
PCmag - Prevx - Editor's Choice
http://www.pcmag.com/article2/0,2817,2346862,00.asp
Try the trial version of Hitman Pro :
Hitman Pro is a second opinion scanner, designed to rescue your computer from malware
(viruses, trojans, rootkits, etc.) that have infected your computer despite all the security
measures you have taken (such as anti virus software, firewalls, etc.).
http://www.surfright.nl/en/hitmanpro
--------------------------------------------------------
If needed here are some online free scanners to help
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://onecare.live.com/site/en-us/default.htm
Microsoft Safety Scanner
http://www.microsoft.com/security/scanner/en-us/default.aspx
----------------------------------
http://www.kaspersky.com/virusscanner
Other Free online scans
http://www.google.com/search?hl=en&source=hp&q=antivirus+free+online+scan&aq=f&oq=&aqi=g1
--------------------------------------------------------
After removing any malware :
Also do these to cleanup general corruption and repair/replace damaged/missing
system files.
Start - type this in Search Box -> COMMAND find at top and RIGHT CLICK -
RUN AS ADMIN
Enter this at the prompt - sfc /scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.microsoft.com/kb/928228
Run checkdisk - schedule it to run at next start and then Apply OK your way out then restart.
How to Run Check Disk at Startup in Vista
http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html
-----------------------------------------------------------------------
If any Rootkits are found use this thread and other suggestions.
(Run UnHackMe)
http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/a8f665f0-c793-441a-a5b9-54b7e1e7a5a4/
======================================
If needed AFTER you are sure the machine is clean of all malware.
(DO NOT USE IF
MALWARE IS STILL PRESENT.)
You can try an In-Place Upgrade or a repair installation.
You can use another's DVD as they are not copy protected however you will need you own
Product Key.
It has to be the same 32 or 64 BIT OEM version of Vista.
Also the System
maker will usually sell the disk cheap since you already own Windows.
Be sure to do a
good backup or 3 (safety in redundancy).
In-Place Upgrade
http://vistasupport.mvps.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm
This tells you how to access the System Recovery Options and/or from a Vista DVD
http://windows.microsoft.com/en-US/windows-vista/What-happened-to-the-Recovery-Console
How To Perform a Repair Installation For Vista
http://www.vistax64.com/tutorials/88236-repair-install-vista.html
=======================================
For extreme cases :
Norton Power Eraser - Eliminates deeply embedded and difficult to remove crimeware
that traditional virus scanning doesn't always detect.
Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal.
You should use this tool very carefully, and only after
you have exhausted other options.
http://us.norton.com/support/DIY/index.jsp
================================
If you are in North America, you can call 866-727-2338 for help with virus and spyware
infections.
See http://www.microsoft.com/protect/support/default.mspx for details.For
international information, see your
local subsidiary Support site.
Microsoft Support - Virus and Security Solution Center
http://support.microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab0
Hope this helps.
Rob Brown -
Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.
Note: It is recommended that you back up your files and folders before attempting this step:
- Move the mouse cursor over to the upper right side of the screen.
- A menu will pop up on the left. Click on the "Settings" feature on the menu.
- On the Settings window, click on the "Change PC settings."
- Now, left click on the "Update and recovery" feature.
- For the next step, left click on the "Recovery" feature.
- There is an option here saying "Refresh your PC without affecting your files." There, left click on the "Get started" button.
- Now, follow the instructions on the screen to finish the Refresh process.
- After the Refresh process has finished restart your Windows 8.1 or Windows 8 device.
- Check again to see if the error All "**.exe" programs will not start by just clicking on the shortcut icon. has been fixed.
If you do not possess the technical expertise required to accomplish this yourself or do not feel comfortable doing so, download and install a powerful automated tool to get the job done.
Another Safe way to Fix the Problem: All "**.exe" programs will not start by just clicking on the shortcut icon.:
How to Fix All "**.exe" programs will not start by just clicking on the shortcut icon. with SmartPCFixer?
1. Download SmartPCFixer. Install it on your system.
2. After the scan is done, you can see the errors and problems which need to be repaired.
3. When the Fixing part is done, your computer has been speeded up and the errors have been removed
Related: Fast Solution to Problem: Error http//go.microsoft/fwlink/?linkId=144689 occurs at every reboot,,Troubleshooting:I tried to download the latest version of Internet Explorer 9, but it will not update the download due to a message that states "Wrong version of Internet Explorer installer" Error,Fast Solution to Error: IE9 Search Taking Me to Web Pages Rather Than Search Results,Random freezing after updating to SP1 (Windows 7) Tech Support,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: How Can I Fix - aim won't start up__?,How to Fix - After working fine for about day Windows Home Premium Full install is hanging after it sits idle for awhile(several hours).?,Solution to Error: After replaceing my old xp Desktop with a windows 7 desktop, my wifes xp Laptop can't access my two printers through our Linksys Mod# WRT160N Wireless-N Broadband Router,How to Fix Problem - After latest update; Internet connection fails?,[Solved] After Upgrade from 8 to 8.1 Corel Draw can't handle copy function,Able To Install Multiple Versions Of Office?,A couple of years ago I downloaded a homeccounting template I can't find now is there a place where I can look for other templates that are not lis ated?,add on information bar - Preventing me from being able to download anything,addin for excel doesn't exist in "C:\Program Files\Microsoft Office\Office12\1033",Adding degrees on Calculator
No comments:
Post a Comment