Computer Error Fixer: Troubleshooter of Error: DNS server not responding in windows 7

Thursday, September 29, 2016

Troubleshooter of Error: DNS server not responding in windows 7

DNS server not responding in windows 7

I have been getting this error for 4 days -- related to an update(?)

This happens ONLY on my Windows 7 systems -- I have 2 Macs, 2 Windows XP, 1 Linux, and one Android system on the same network, and they all operate normally.
This is a NETGEAR DGN2200 Router with DSL modem

The best answer I have seen so far is to use your IP Address as the primary DNS, but this is only viable for a static address -- not for DHCP.

Please advise what -- and where to make settings changes -- router, or workstations?

Thanks for any help.

Hugh Coyle
2033B 38th Street
Washington DC 20020
h: 202-583-1431
c: 202-577-5312
e: *** Email address is removed for privacy *** (default)
e: *** Email address is removed for privacy *** (goes to my cell)

Keys to the Problem DNS server not responding in windows 7

Download Error Fixer for Free Now

Hi HughCoyle,

1. Are the computer on a domain network?
2. Did you make any changes to the computer before the issue started?
However, you may try to run the Network troubleshooter built in Windows 7 and check if it helps you fix the issue.
Access the link below and follow the steps to run Network troubleshooter in Windows 7.

http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

Perform steps mentioned below and see if the issue occurs.

a :Click Start.
Type cmd
in the Start Search box, and then press ENTER.

b: At the command prompt, type the following command, and then press ENTER:
ipconfig /flushdns (there is a space between ipconfig and / )
It will show the message successfully flushed the DNS resolver cache.
c: At the command prompt, type the following command, and then press ENTER:
ipconfig /registerdns (there is a space between ipconfig and / )
d:At the command prompt, type the following command, and then press ENTER:
ipconfig /all (there is a space between ipconfig and /)

The ipconfig /all command displays Windows TCP/IP settings for all your network adapters.
If your IP address for your Local Area Connection is either 0.0.0.0 or 169.x.x.x (where x is any number), then your computer is not getting an IP address from the router.

If that is the case, try this:
• ipconfig /release in the command prompt and press ENTER
• ipconfig /renew in the command prompt and press ENTER

Test it again by typing ipconfig /all to see what the address is? (If you are on a home router, it should start with either 192.168.1.x or 192.168.0.x or 10.x.x.x)

Hope this information helps.

To check for Windows updates

Open Windows Update by clicking the Start button Picture of the Start button, clicking All Programs, and then clicking Windows Update.
In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer.
If any updates are found, click Install updates. Administrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation.