After awakening from sleep and hung on an manual update to Avast, Task Manager and Resource Monitor(RM) disk activity is at 100%, CPU is at 1 or 2% & memory at about 12%.
Original title: I am getting 100% HDD activity
Hi, problems started a few days ago and have tried all to correct. PC slowed to a crawl after awakening it from sleep, then it hung on an manual update to Avast.
I did a restart, which required a "force shutdown" from prompt.
On the restart, and every subsequent start, it takes about 20 minutes just to right mouse click on the desktop and see the wait thing????? All the while HDD led is solid, and when I can finally get into TM and Resource Monitor(RM) disk activity is at 100%.
CPU is at 1 or 2%, memory at about 12%.
Eventually the HDD settles and I can access internet, but not without "IE is not responding", as well I can access event viewer and such, all which take some time to fully open and show the info.
The HDD often spikes to the 100% and if I have the RM open, SYSTEM, svchost (dcom and or localservice...), perfmon, and taskhost seem to spike, and then disk falls off to 0% activity.
It is during these spikes, nothing works, even to the point that if I were to be typing this message, the letters typed would not appear.
Without the spikes usage is limited, and extremely long load times.
For example, I suspected a HDD problem and after
trying other apps to verify, I re-ran windows experience index.
The cpu, memory and graphics portions ran what I recalled to be at a normal time, but the Disk portion took 18 minutes, the monitor is set to turn off in 10, and it did.
The rating came as it
had been, 5.9.
I am hopeing someone can tell me how exactly to determine if read/write speeds are messed up, or it is not running at it's speed, 7200rpm, what app can be used?
To further, on every shut down or restart, I get the prompt that taskhost is shutting down background tasks or similar.
I have run sfc \scannow verifyonly, in win\system32 - no problems, restored to earlier date - 3 hours - no change, installed and used Process Explorer, tdsskiller, Malwarebytes and did complete scan with Avast.
NOTE: tdsskiller and Avast did each findcone
"low threats" which were quarantined.
Ran ANALYZE on defragmenter and showed 10% fragmentation on 162Gb used of 1Tb.
My start-up file has only 6 items, as it always has, I have tried diagnostic start up from both Safe mode and windows.
As well, I have swapped HDD cable, port and controller ( mobo has Intel and Marvell) as well as used other HDD (loaded with Win 7 64 Home
Prem..) on the same cables ect., all is well.
Sorry for the length of this, and I have omitted and forgot much, but I am lost, and baffled. Any help is HIGHLY appreciated.
Thank-you, Todd
Windows 7 Pro 64 SP1, i5 2500k @3.3Ghz, 8Gb Kingston DDR3 @ 1333Mhz 1.5v, MSI P67A GD65, Seagate ST31000524AS 1Tb hdd
Keys to the Problem After awakening from sleep and hung on an manual update to Avast, Task Manager and Resource Monitor(RM) disk activity is at 100%, CPU is at 1 or 2% & memory at about 12%.
Download Error Fixer for Free Now
Run CHKDSK
- Go to the Start button.
- In the Search box, type "cmd" (without quotes) and press Enter.
- At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
- Reboot your computer.
"Access denied as you do not have significant privileges. You have to invoke this utility in elevated mode."
If you receive the above error message, it means you are not logged into you computer as an Administrator. If that's the case, follow these steps to run the command prompt in elevated mode:
- Go to theStart button.
- Go to "All Programs > Accessories" and right click on "Command Prompt".
- Select "Run as Administrator".
- In the Search box, type "cmd" (without quotes) and press Enter.
- At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
- Reboot your computer.
Recommended Method to Repair the Problem: After awakening from sleep and hung on an manual update to Avast, Task Manager and Resource Monitor(RM) disk activity is at 100%, CPU is at 1 or 2% & memory at about 12%.:
How to Fix After awakening from sleep and hung on an manual update to Avast, Task Manager and Resource Monitor(RM) disk activity is at 100%, CPU is at 1 or 2% & memory at about 12%. with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your computer. Open it, and it will scan your system. The errors will be shown in the scan result.
2. After the scan is done, you can see the errors and problems need to be repaired. Click Fix All.
3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.
Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: Troubleshooting:Adding new row labels fields in pivot table from new columns in named table range Error,Solution to Problem: After a recent update I cannot print from my email or internet, getting Error Line 2107 \"an error has occurred\",Troubleshoot:Adding attachments to my email, the folders are out of alphabetical order.,How to Fix - addresss bar doesn't change to green colour - When logging into encrypted \/ secure websites?,Troubleshooting:Aero Interface \/ Display not working on Dell Inspiron 9200 after upgrade,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded
No comments:
Post a Comment